DBX 560A Modular 500 Series Compressor Limiter Sale

Description
dbx DBX560A overview
The 500 Series 560A Compressor Limiter from DBX offers VCA-based compression with the switch-selectable OverEasy and Hard Knee compression curves. With a wide-ranging threshold, ratio and output controls and true RMS level detection, the compressor provides natural-sounding dynamics. The 560A will provide much needed punch to drums, bass, vocals and also subtle compression to brick wall” peak limiting.
Choose low ratios and OverEasy compression to expertly smooth out fluctuating vocal and instrumental levels, or use the 560A s Hard Knee compression and high ratios for protection against overload distortion in digital recording, P.A. systems, and broadcast signals.
The 19-segment, switchable Input Output LEDs and 12-segment Gain Reduction LEDs provide precise analysis at a glance. And, the INFINITY+ inverse-compression mode actually decreases the audio output level below unity gain when the input exceeds threshold, correcting overbearing vocal choruses and controlling runaway mix levels.
- OverEasy or classic hard knee compression with ultra-musical program dependent attack and release times
-
- Compression ratio variable from 1:1 through infinity:1 to -1:1
-
- Precise RMS gain reduction and input output meter displays with calibration control for different operating levels
-
- True RMS level detection
-
- Infinity+ compression using negative ratios
-
-
-
-
dbx DBX560A specs
Input Type
Electronically balanced unbalanced, RF filtered
Input Impedance
40 kOhms balanced, 20 kOhms unbalanced
Maximum Input Level
+22 dBu
CMRR
>40 dB; typically >55 dB at 1 kHz
Output Type
Electronically balanced unbalanced, RF filtered
Output Impedance
Balanced 30 ohms, unbalanced 15 ohms
Maximum Output Level
+22 dBu
Frequency Response
20 Hz – 20 kHz, + 0 -0.5 dB; 0.5 Hz – 100 kHz, +0 -3 dB
Noise
THD+N
<0.005% typical, no compression, 1 kHz input at 0 dBu; <0.07% typical, any amount of compression up to 40 dB @ 1 kHz
Dynamic Range
>119 dB
Gain Adjustment Range
Variable from -20 dB to +20 dB
Compressor Threshold
-40 dBu to +20 dBu
Threshold
Selectable OverEasy or Hard Knee
Ratio
Variable 1:1 to infinity:1 thru to -1:1; 60 dB maximum compression
Attack Time
Program-Dependent; typically 15 ms for 10 dB, 5 ms for 20 dB, 3 ms for 30 dB
Release Time
Program-Dependent; typically 8 ms for 1 dB, 80 ms for 10 dB, 400 ms for 50 dB; 125 dB Sec Rate
Power Requirements
+ – 16 VDC
Current Draw
60 mA per power rail
Power Draw
1.92 W
Rack Compatibility
500 Series compatible power-frame
Rack Space
1 slot
Dimensions (H x W x D)
5.25 x 1.5 x 6 (13.34 x 3.81 x 15.24 cm)
Weight
1.3 lb (0.59 kg)
-
Additional Information
Title
Default Title
postmatchus.shop © 2025 All Rights Reserved
-
-
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
- Image
- SKU
- Rating
- Price
- Stock
- Description
- Weight
- Dimensions
- Additional information
- Add to cart
The 500 Series 560A Compressor Limiter from DBX offers VCA-based compression with the switch-selectable OverEasy and Hard Knee compression curves. With a wide-ranging threshold, ratio and output controls and true RMS level detection, the compressor provides natural-sounding dynamics. The 560A will provide much needed punch to drums, bass, vocals and also subtle compression to brick wall” peak limiting.
Choose low ratios and OverEasy compression to expertly smooth out fluctuating vocal and instrumental levels, or use the 560A s Hard Knee compression and high ratios for protection against overload distortion in digital recording, P.A. systems, and broadcast signals.
The 19-segment, switchable Input Output LEDs and 12-segment Gain Reduction LEDs provide precise analysis at a glance. And, the INFINITY+ inverse-compression mode actually decreases the audio output level below unity gain when the input exceeds threshold, correcting overbearing vocal choruses and controlling runaway mix levels.
- OverEasy or classic hard knee compression with ultra-musical program dependent attack and release times
- Compression ratio variable from 1:1 through infinity:1 to -1:1
- Precise RMS gain reduction and input output meter displays with calibration control for different operating levels
- True RMS level detection
- Infinity+ compression using negative ratios
dbx DBX560A specs
Input Type Electronically balanced unbalanced, RF filtered Input Impedance 40 kOhms balanced, 20 kOhms unbalanced Maximum Input Level +22 dBu CMRR >40 dB; typically >55 dB at 1 kHz Output Type Electronically balanced unbalanced, RF filtered Output Impedance Balanced 30 ohms, unbalanced 15 ohms Maximum Output Level +22 dBu Frequency Response 20 Hz – 20 kHz, + 0 -0.5 dB; 0.5 Hz – 100 kHz, +0 -3 dB Noise THD+N <0.005% typical, no compression, 1 kHz input at 0 dBu; <0.07% typical, any amount of compression up to 40 dB @ 1 kHz Dynamic Range >119 dB Gain Adjustment Range Variable from -20 dB to +20 dB Compressor Threshold -40 dBu to +20 dBu Threshold Selectable OverEasy or Hard Knee Ratio Variable 1:1 to infinity:1 thru to -1:1; 60 dB maximum compression Attack Time Program-Dependent; typically 15 ms for 10 dB, 5 ms for 20 dB, 3 ms for 30 dB Release Time Program-Dependent; typically 8 ms for 1 dB, 80 ms for 10 dB, 400 ms for 50 dB; 125 dB Sec Rate Power Requirements + – 16 VDC Current Draw 60 mA per power rail Power Draw 1.92 W Rack Compatibility 500 Series compatible power-frame Rack Space 1 slot Dimensions (H x W x D) 5.25 x 1.5 x 6 (13.34 x 3.81 x 15.24 cm) Weight 1.3 lb (0.59 kg) Additional Information
Title Default Title
postmatchus.shop © 2025 All Rights Reserved
- Image
- SKU
- Rating
- Price
- Stock
- Description
- Weight
- Dimensions
- Additional information
- Add to cart